1-50 of 9922 results (30ms)
2025-12-04 §
21:37 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.add_k8s_etcd_node (exit_code=0) [tools]
21:20 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.add_k8s_etcd_node (T375217) [tools]
21:10 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=0) [tools]
21:02 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
20:52 <andrew@cloudcumin1001> END (FAIL) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=99) [tools]
20:45 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
20:40 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.add_k8s_etcd_node (exit_code=0) [tools]
20:23 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.add_k8s_etcd_node (T375217) [tools]
20:10 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=0) [tools]
20:03 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
20:03 <andrew@cloudcumin1001> END (FAIL) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=99) [tools]
19:56 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
19:56 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.add_k8s_etcd_node (exit_code=0) [tools]
19:38 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.add_k8s_etcd_node (T375217) [tools]
19:35 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=0) [tools]
19:28 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
19:13 <andrew@cloudcumin1001> END (FAIL) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=99) [tools]
19:06 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T361237) [tools]
2025-12-03 §
19:49 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.add_k8s_etcd_node (exit_code=0) [tools]
19:31 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.add_k8s_etcd_node (T375217) [tools]
17:39 <andrew@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=0) [tools]
17:32 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T375217) [tools]
17:32 <andrew@cloudcumin1001> END (FAIL) - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (exit_code=99) [tools]
17:25 <andrew@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.etcd.depool_and_remove_node (T375217) [tools]
2025-12-02 §
20:22 <andrewbogott> stop/starting harbordb1 to fix presumed mtu mismatch [tools]
20:06 <andrewbogott> rebooting tools-harbordb1 to aid with host draining [tools]
08:31 <volans@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.logging.copy_images_to_registry (exit_code=0) for Alloy 1.11.3 (T399313) [tools]
08:30 <volans@cloudcumin1001> Updating container image docker-registry.svc.toolforge.org/grafana/alloy:v1.11.3 (T399313) [tools]
08:30 <volans@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.logging.copy_images_to_registry for Alloy 1.11.3 (T399313) [tools]
2025-12-01 §
22:31 <volans@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.logging.copy_images_to_registry (exit_code=0) for Alloy 1.4.0 (T399313) [tools]
22:30 <volans@cloudcumin1001> Updating container image docker-registry.svc.toolforge.org/grafana/alloy:v1.4.0 (T399313) [tools]
22:30 <volans@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.logging.copy_images_to_registry for Alloy 1.4.0 (T399313) [tools]
16:46 <volans@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component infra-tracing [tools]
16:26 <volans@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component infra-tracing [tools]
2025-11-27 §
12:15 <volans> [continue] on the haproxy nodes [tools]
12:15 <volans> temporarily disabling puppet to deploy gerrit 1211610 [tools]
2025-11-26 §
14:48 <volans> enabled infra-tracing-nfs on all nfs workers after testing it on few hosts [tools]
09:46 <dhinus> restarting tools-db-6 to apply a config change T409922 [tools]
2025-11-25 §
02:47 <raymond-ndibe@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component registry-admission [tools]
02:38 <raymond-ndibe@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component registry-admission [tools]
02:29 <raymond-ndibe@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component maintain-kubeusers [tools]
02:10 <raymond-ndibe@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component maintain-kubeusers [tools]
01:53 <raymond-ndibe@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component api-gateway [tools]
01:49 <raymond-ndibe@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component api-gateway [tools]
01:45 <raymond-ndibe@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component logs-api [tools]
01:36 <raymond-ndibe@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component logs-api [tools]
2025-11-24 §
10:23 <volans@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.component.deploy (exit_code=0) for component infra-tracing [tools]
10:04 <volans@cloudcumin1001> START - Cookbook wmcs.toolforge.component.deploy for component infra-tracing [tools]
2025-11-20 §
18:26 <dcaro@cloudcumin1001> END (PASS) - Cookbook wmcs.toolforge.k8s.reboot (exit_code=0) for tools-k8s-worker-nfs-34 [tools]
18:07 <dcaro@cloudcumin1001> START - Cookbook wmcs.toolforge.k8s.reboot for tools-k8s-worker-nfs-34 [tools]